This product is designed to control the growth of unwanted vegetation in an environmentally safe manner. This is accomplished without adding to your runoff problems, as would be the case when using asphalt, concrete, or other nonporous weed-control methods.
This type of roll is usually used when the spacing of the guardrail or cable barrier (aka: guard cable or cable rail) is inconsistent, such as at end treatments, or melts, in boats, and in beautification programs when using plants and shrubs. These non-punched rolls are also used for repairs, such as after an auto accident. (Almost all estimates require some WeedEnder® in these configurations.)
WeedEnder® Non-punched Rolls have no punch-out or slit and are available in different lengths and widths. The standard length is usually 250′ long. This may vary because of the millrun when the material is originally made. Each roll will be clearly marked with the footage on each roll. (Your order will total the correct length.) You may also order odd-size lengths to fit specific needs. This is usually the case on every estimate. Widths may be any width from 1′ to 8′. The standard for single guardrail is 3′ to 4′. The standard for double guardrail is 4′ to 8′ and the cable barrier (aka: guard cable or cable rail) standard is 3′ wide. WeedEnder® rolls may be joined together for wider widths.